Answered on Apr 04, Simultaneously press the retaining clips outward to unlock the DIMM. Did it run OK on 1GB x 2? Modify your browser’s settings to allow Javascript to execute. You should be fine with the MB card as it is pretty small. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. Ask a Question Usually answered in minutes!

Uploader: Balmaran
Date Added: 23 February 2015
File Size: 11.22 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 87142
Price: Free* [*Free Regsitration Required]

asus ptgd-la AUDIO drivers

Any help is apreciated. Under Linux, use the Hyper-Threading compiler to compile the code. If that does not do it, you have serious mo bo issues. This port connects a headphone or a speaker. Answered on Feb 14, For dual-channel configuration you may: Here’s the Memory Configurations: This would be for the speed you choose for the memory sticks primarily It can also refer to the source of the clocking reference if you wanted to try overclock your processer for greater computing sounr than the factory designated speed.

Micro-ATX form factor, 9.

Do not change any jumper setting while the computer is on. The BIOS is the heart of the motherboard and has nothing to do with system issues and should not be taken on by novice computer users.


Asus PTGD1-LA Motherboard sound issue | Support Forums

If password checking is enabled, and you need to disable it, use the following steps:. If you install two hard disk drives, you must configure the second drive as a slave device by setting its jumper accordingly.

First, I know its a pain but disconnect and reconnect all cables verify that your not missing one of your power cables look for any pfgd1-la on the board that don’t have cables hooked up to it. Keep the cap on pins for about 10 seconds, then move the cap back to pins Locked Retaining Clip 3.

HP and Compaq Desktop PCs – Motherboard Specifications, PTGD1-LA (Puffer2)

If you are in need of additional help, please let us know. Answered on Jan 17, Simultaneously press the retaining clips outward to unlock the DIMM. Reset button This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket. To use the Hyper-Threading Technology on this motherboard: You must log in or sign up to reply here. Rear speaker out black port connects to the rear speakers on a 4-channel audio configuration. Plug the power cord and turn ON the computer.


My name is Jeff and I will be assisting you today. Posted on Jan 07, Be the first to answer. After connecting one end to the motherboard, connect the other end to the floppy drive. Motherboard layout and photos Figure: If the instructions in this section do not match the CPU documentation, follow the latter.

This assuming I have no CDs which came with the computer. Did it run OK on 1GB x 2?


This prevents incorrect insertion when you connect the IDE cable. You can get it here: So, I wouldn’t feel right suggesting one, without the actual chipset ID on your motherboard.

Answered on Feb 22, Refer to the tables below.